MECHANISMSSoftwareDoor CylindersRim and MorticeAbloy Protec CliqPadlocksCam and FurnitureElectric LocksDoor Closers and Door Operators


Abloy introduces the following new products in Canada and USA.






New Cam Lock CL738T
This cam lock has a 2 positions (2 pulls) – key removes Locked position and Open position.
Inset key and turn left to move cam counterclockwise and remove the key at starting position.
Insert key and turn right to move cam clockwise and remove the key at starting position.
In summary, instead of turning clockwise continuously as earlier models, this is a LEFT turn and RIGHT turn  2 key pull function.
New Switch Lock EP602T or EP602N
This switch lock operates much like the above CL738T in that insert key and turn left – turns ON the attached switch.
Insert key and turn right turns OFF the switch.
Key removes at starting position for both ON and OFF.
In summary this is a new left turn and right turn as opposed to continuously turning clockwise as earlier models.
New Mortise Cylinder product CYP415T or CYP415N
This new cylinder has built-in spring loaded dust cover door as such it has a larger head than the normal cylinder to allow space for the new incorporated dust cover.
New Mortise Cylinder option CY415T-1 or CY415N-1
This new option for the standard 1 1/8 inch mortise cylinder allows you to order this cylinder supplied with a cam and 2 cam screws and not with the rim function parts (no rim connectiing screws,backplate and tailpiece).
Mortise Cylinder Installation Tool P/N 399100
Helps in the installation of an Abloy Mortise Cylinder in Protec or Protec2
Holds the Mortise cylinder while you are threading into the lock case
Especially recommended for the installation of Abloy CLIQ mortise cylinders- prevents putting too much tension on the electronic contacts inside the cylinder.


Copyright 2012, ABLOY Canada Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of ABLOY Canada Inc. is prohibited